XCam-p

Presence Detector

Product overview

XCam-p is a presence detection sensor designed to replace or expand upon inductive loops.

Designed and optimized for intersections and on-ramps, XCam-p is an above-ground detector that eliminates constraints imposed by embedded loops upon installation and maintenance: lane closure, cutting road surface, etc.

XCam-p can be connected to any traffic controller using XCom a universal communication board. XCam-p is IP addressable and can directy communicate over IP to newer generations of traffic controllers.

XCam-p features a WDR (Wide Dynamic Range) CMOS sensor and an image optimisation module to enhance detection performances in any lighting conditions.

With low-power consumption and wireless capabilities (optional), XCam-p provides unrivaled seamless installation.

Functions

  • Vehicle presence detection
  • Stop bar / Advanced / mid-block detection

Features

  • Wide Dynamic Range (WDR) sensor for enhanced detection performances
  • Ethernet and RS485 communications, IP addressable
  • Color video streaming including OSD for detection zone status display
  • PC based Configuration and monitoring tool: XCamMonitoring
  • Fail-safe outputs
  • Digital zoom

Benefits

  • Vehicle presence detection
  • Above-ground detector
  • High accuracy in all weather and lighting conditions
  • Digital zoom allows seamless installation on the field

Sensor

  • 1/2,7” WXGA (1280x800) WDR color CMOS sensor
  • Minimum illumination 0.04 lux @ f/1.2
  • Anti-blooming, zero smearing
  • Signal to Noise ratio: >50dB

Housing

  • IP67 Injection molded polycarbonate housing
  • Sun shield for hot climate anddirect sun exposure (option)
  • Size: 132 x 254 x 124 mm

Accessories

  • Supplied with complete mounting brackets and connection box

Hardware

  • Power Supply: +12/24V AC/DC
  • Power consumption: 3W
  • -34°C / +74°C
  • Operating temperature: -34°C / +74°C
  • Humidity: 0 to 95% RH, non-condensing
  • Weight: 600g

Communications

  • Direct output: Ethernet or RS485
  • Output to Citilog XCom: Ethernet or RS485
  • Citilog SDK: XML
  • Other standard protocols DIASER, Modbus…
  • Wireless communication module (option)

We continually strive to improve the performance of our products and solutions ; hence the specifications and capabilities are subject to change. For complete specifications please download the data sheet.

This smart sensor is a cost-effective solution for presence detection and inductive loop replacement


INTERESTED IN THIS SOLUTION?



SEE THIS PRODUCT IN ACTION



SEE OTHER PRODUCTS

scroll up